Specifics About Your Car's Brakes For Twinsburg Ohio Drivers

The car or van brake system is in reality consisting of two separate kinds of systems, Hydraulics and Friction Materials. This is the stuff that happens within these systems between the time your foot depresses on the brake pedal and your car or van arives at a complete stop.

The car's braking system has hydraulics, which contain the master cylinder.

When pressure is applied to the brake pedal, the master cylinder produces hydraulic pressure which moves brake fluid to the wheel brakes.

Steel brake lines and high pressure rubber hoses are the avenues the pressurized brake fluid travels.

The car's wheel cylinders and calipers are the hydraulic cylinders that apply pressure to the friction materials, causing your vehicle to stop.

The brakes friction materials comprises the brake pads and your drum brake shoes.

Your car or truck brake linings are made of high temperature materials that produce the friction that stops your car, truck, or van.

There are actually many distinctive kinds of brakes.

Disc brakes comprises a disc brake rotor, that is attached to the wheel, and a caliper, that holds the disc brake pads. Hydraulic pressure through the master cylinder will cause the caliper piston to clamp the disc brake rotor between the disc brake pads. This produces friction between the pads and rotor, causing your car to slow down or stop.

The drum brakes comprises a brake drum attached to the wheel, a wheel cylinder, brake shoes and brake return springs. Hydraulic pressure from the master cylinder causes the wheel cylinder to press the brake shoes against the brake drum. This produces friction between the shoes and drum to slow or stop your car.

The car's parking brake makes use of cables to mechanically apply the brakes (usually the rear brake.) This is used to keep the car from rolling when not being driven.

Subsequently we have your anti-lock brakes. The anti-lock brakes are certainly a braking system developed for safety.

Computer-controlled anti-lock braking systems (ABS) are a recently designed safety feature. When sudden stops are made, the ABS prevents wheel lock-up. The system is comprised of wheel-speed sensors that monitor wheel rotation, computer-controlled hydraulics which pulse the brakes on and off swiftly, and the on-board computer.

Indications that your van or truck brakes might call for service include screeching sounds as you begin to apply the brakes. This kind of screeching sound is your brakes telling you that they want to be serviced, perhaps just needing brand new brake pads. A grinding noise as well means that your brakes need service. Brakes that fail when you are trying to stop your car are no joke. You need to get them serviced as soon as possible.

Choose a local automobile service center that specializes in brake work. Find out if they can service your brakes when you wait, or at the least offer you a courtesy ride home or to your workplace. A free loaner car possibly will be needed. Ask about being AAA approved, also if the shop is A.S.E. Certified technician.