Many more Americans are into recycling these days and saving something that is older is a good idea. There are now several different Weber Char Broil Grill Parts offered in order to replace parts that are either broken or not functioning properly due to the wear and tear of time. These pieces that will save a grillers machine from the landfill can be found online or in special hardware stores.
Many of the gas grills need to have their heat plates replaced more often then other items. There is a Heat Plate #7000045 for the Char-broil grill that measures approximately 11 3/4" x 5 5/8" that can be traded for one that the factory installed that could have been worn over time and does not heat anymore. These are sometimes referred to as 'flame tamers' with some models having three and some having four to heat a good meal. Some companies will discount a box of additional units.
The Performance and Advantage styles of charbroil machines have a stainless steel style heat plate that could be replaced with a newer model if need be. Model CBHP1 Char-broil S/S with measurements of 11 3/4" x 5 5/8" can replace several different kinds of burners on various model grills.
A Char-broil burner carry over tube is another module that is often needed when it comes to replacing pieces on an outdoor grill. Number 7000277 are designed to fit over CBPCI, flame tamer 700045 and burner CBP1. This carryover unit burner tube will also be used for the Char-broil Performance model number 461350805 grill.
There are also cooking pieces that will help to enhance the experience of grilling. These additional cooking units come in several different sets; some can be substituted for models 80005665 and 80005724. These cook grids are a two piece set and together measure 18 1/4" x 26 1/4" with each piece measuring 18 1/4" x 13 1/8". These cooking units will also fit the Thermos, Kenmore and Uniflame brands of outdoor grilling machines.
The number 7000181 Char-broil warming rack comes in handy when an individual wants to keep their meats warm when the rest of the dinner is being prepared. There are over 31 Performance models this rack for warming will adapt to and two different models for the Advantage series grillers.
For those people who are taller or who simply don't like to lean over, there are the extender legs for giving the Char-broil grill a little 'lift'. A set of two, model number 7000230 are used in well over 45 unique models of Performance series and only four models in the Advantage grills.
Depending on what type of Weber Char Broil Grill parts a barbeque machine owner needs, they could find them at a large hardware store or an online specialty store. These pieces are for replacement of the original elements that may have simply burnt out from too much usage or broken over time. It is recommended to consult the owners manual of the machine in order to get the correct parts numbers for a replacement piece before sending away for one or picking it up at the store.