A durable and highly portable gas leak detector, the Gas Alert Clip Extreme H2S is a hassle free way to prevent over exposure to Hydrogen Sulfide and warn the bearer of dangerous levels.
Sporting water-resistant casing, as well as concussion protection, these detectors will run continuously for their full life span of two years (three year life is available on special order).
Gas Alert Clip sniffers require no maintenance (no sensor changing, battery charging or suchlike) and are incredibly simple to use (featuring Honeywell's simple one-button interface).
You can be sure you are safe, with the large LCD screen displaying current gas levels and visual, audible and vibration alarms set to ring should you encounter dangerous levels of gas.
Hydrogen Sulphide is both toxic and flammable; while it does have a distinct aroma "rotten eggs" prolonged exposure can dull your sense of smell, so you cannot rely on this alone. Should you be working in an environment where you might encounter H2S (sewers, oilrigs, wastewater plants and refineries for example), it is important to stay protected and up to health and safety standards.
As well as protecting you and your employees, the gas detector can be a valuable source of information, and full data logs can be downloaded via the MicroDock II interface.
Each unit is packed individually in a cardboard box, with instruction manual sheet, warranty card, calibration/bump test adapter and calibration certificate from the factory.
Features:
Measuring Range: 0-100ppm
Low Alarm level: 10PPM
High Alarm Level: 15PPM
No Sensor Replacement
No Calibration
Temperature Range: -40 to +122 degree F / -40 to +50 degree C
Battery life: 2 years
Specifications:
Size: 1.1 x 2.0 x 3.2 in. / 2.8 x 5.0 x 8.1 cm
Weight: 2.7 oz. / 76 g
Temperature: -40 to +122°F / -40 to +50°C
Humidity: 5% - 95% RH (non-condensing)
Alarms: Visual, vibrating, audible (95dB) - Low, High
Tests: Full function self-test on activation and every 20 hours, and automatic battery test every 2 hours
Typical battery life: Two years